• Popular 5 Km RF Remote Control Switch Kl-K120la-12CH
  • Popular 5 Km RF Remote Control Switch Kl-K120la-12CH
  • Popular 5 Km RF Remote Control Switch Kl-K120la-12CH
  • Popular 5 Km RF Remote Control Switch Kl-K120la-12CH
  • Popular 5 Km RF Remote Control Switch Kl-K120la-12CH
  • Popular 5 Km RF Remote Control Switch Kl-K120la-12CH

Popular 5 Km RF Remote Control Switch Kl-K120la-12CH

Port: Shenzhen, China
Production Capacity: 100000pieces/Month
Payment Terms: L/C, T/T, D/P, Western Union, Paypal
Voltage: DC12V
Maximum Load: 7A
Weight: 162g
Work Mode: Momentary, Latching, Toggle,Adjustable
Transport Package: Carton
Specification: 148*83*40mm

You Might Also Like

Loading...

Basic Info.

Model NO.
KL-K120LA-12ch
Trademark
KELVIN
Origin
Shenzhen, China
HS Code
8526920000
            Popular 5 Km RF Remote Control Switch KL-K120LA-12CH

Popular 5 Km RF Remote Control Switch Kl-K120la-12CH
Popular 5 Km RF Remote Control Switch Kl-K120la-12CH


KL-K400LA is a super-far-distance remote control switch with bidirectional communication which developed by exploitation lately. Its core adopts spread spectrum communication technique to increase anti-jamming performance. It has ultra high sensitivity, super far operation range, strong anti-interference ability. The measured operation range is 6km LOS (line of sight) in open area. It is the best choice for super long distance remote control system and communication.

Tech Data:
InputDC12V (AC220V/380V is customized)
Quiescent Current16mA
Working Current65mA
Max Load7A (Relay Contact)
Working Frequency434MHz (Customize 868MHz / 915MHz, shorter distance.)
Modulation TypeFSK+LORA
Coding TypePrivate Learning Code

Operation Method:
1.Match Code: Press learning button K1 for 3seconds, LED indicator lights, and press any button on the remote control. When LED flashes twice, matching is done.
2.If need to add more remote controls, please repeat step 1 and max 20pcs can be matched.
3.Delete Code: Press K1 and hold on, do not release until LED flashes 3 times, and then delete code successfully.
4.Select output mode:
  (By adjusting DIP switch)
  (1)DIP switch No.1→ ON, Toggle Mode;
  (2)DIP switch No.2→ ON, Latching Mode;
  (3)Both are not ON, Momentary Mode.
  (4)Both are ON, Setting is invalid, no output.
5.DIP switch NO.3 is used to select if you need feedback signal. If yes, push it to ON (corresponding S1 on remote control). The remote control will sound "Di…" after receiving the feedback from the receiver. This way is used to let the user know if the receiver works well.
Working Mode:
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, B is off. Press button B, the replay B is on, A is off.
Wiring Way & Diagram:
G=Common, K=Normally Open, B=Normally Closed
Please refer to below diagram as wiring.
Operation Method:
1.Match Code: Press learning button K1 for 3seconds, LED indicator lights, and press any button on the remote control. When LED flashes twice, matching is done.
2.If need to add more remote controls, please repeat step 1 and max 20pcs can be matched.
3.Delete Code: Press K1 and hold on, do not release until LED flashes 3 times, and then delete code successfully.
4.Select output mode:
  (By adjusting DIP switch)
  (1)DIP switch No.1→ ON, Toggle Mode;
  (2)DIP switch No.2→ ON, Latching Mode;
  (3)Both are not ON, Momentary Mode.
  (4)Both are ON, Setting is invalid, no output.
5.DIP switch NO.3 is used to select if you need feedback signal. If yes, push it to ON (corresponding S1 on remote control). The remote control will sound "Di…" after receiving the feedback from the receiver. This way is used to let the user know if the receiver works well.
Working Mode:
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, B is off. Press button B, the replay B is on, A is off.
Wiring Way & Diagram:
G=Common, K=Normally Open, B=Normally Closed
Please refer to below diagram as wiring.
Operation Method:
1.Match Code: Press learning button K1 for 3seconds, LED indicator lights, and press any button on the remote control. When LED flashes twice, matching is done.
2.If need to add more remote controls, please repeat step 1 and max 20pcs can be matched.
3.Delete Code: Press K1 and hold on, do not release until LED flashes 3 times, and then delete code successfully.
4.Select output mode:
  (By adjusting DIP switch)
  (1)DIP switch No.1→ ON, Toggle Mode;
  (2)DIP switch No.2→ ON, Latching Mode;
  (3)Both are not ON, Momentary Mode.
  (4)Both are ON, Setting is invalid, no output.
5.DIP switch NO.3 is used to select if you need feedback signal. If yes, push it to ON (corresponding S1 on remote control). The remote control will sound "Di…" after receiving the feedback from the receiver. This way is used to let the user know if the receiver works well.
Working Mode:
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, B is off. Press button B, the replay B is on, A is off.
Wiring Way & Diagram:
G=Common, K=Normally Open, B=Normally Closed
Please refer to below diagram as wiring.
Operation Method:
1.Match Code: Press learning button K1 for 3seconds, LED indicator lights, and press any button on the remote control. When LED flashes twice, matching is done.
2.If need to add more remote controls, please repeat step 1 and max 20pcs can be matched.
3.Delete Code: Press K1 and hold on, do not release until LED flashes 3 times, and then delete code successfully.
4.Select output mode:
  (By adjusting DIP switch)
  (1)DIP switch No.1→ ON, Toggle Mode;
  (2)DIP switch No.2→ ON, Latching Mode;
  (3)Both are not ON, Momentary Mode.
  (4)Both are ON, Setting is invalid, no output.
5.DIP switch NO.3 is used to select if you need feedback signal. If yes, push it to ON (corresponding S1 on remote control). The remote control will sound "Di…" after receiving the feedback from the receiver. This way is used to let the user know if the receiver works well.
Working Mode:
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, B is off. Press button B, the replay B is on, A is off.
Wiring Way & Diagram:
G=Common, K=Normally Open, B=Normally Closed
Please refer to below diagram as wiring.
 
Shipping
1) Express: DHL, FedEx, UPS, TNT, EMS, etc.
2) By air
3) By sea
4) By special line
Depends on buyer's requirement.



 
About Us 
Shenzhen Kelvin Electronics Co. Ltd. is a professional manufacturer of security Products with obtaining ISO9001:2000 quality system approval, CE approval and RoHS certification.
Our products mainly include smoke detectors, door sensors, home alarm systems, panic buttons, wireless remote controls (or switches), wireless transceiver modules, etc.
They are comply with international quality standards and are sold to North America, South America, Eastern Europe, Southeast Asia and other world market.....


http://szklvn.en.made-in-china.com/
Popular 5 Km RF Remote Control Switch Kl-K120la-12CHPopular 5 Km RF Remote Control Switch Kl-K120la-12CHPopular 5 Km RF Remote Control Switch Kl-K120la-12CHPopular 5 Km RF Remote Control Switch Kl-K120la-12CHPopular 5 Km RF Remote Control Switch Kl-K120la-12CHPopular 5 Km RF Remote Control Switch Kl-K120la-12CH
 

Send your message to this supplier

*From:
*To:
avatar Mr. Peter Wu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now