Restaurant Queue Management Waiter Calling Wireless Paging System with 10 Pager for Cafe Shop Kl-QC05

• Customization: Available
• Frequency: 433.92MHz
• Max Distance: 800-1000m
• Model NO.: KL-QC05
• Max Capacity: 998PCS
• Input Power: DC12V/2A
• Battery: Li-ion 3.7V 300mAh
• Transport Package: Case
• Specification: 220*215*26mm
• Trademark: Kelvin
• Origin: China Guangdong
• HS Code: 8517142000
• Production Capacity: 1000/Moth
• Package Size: 32.00cm * 22.00cm * 10.00cm
• Package Gross Weight: 3.000kg

Product Description

KL-QC05 coaster pager system

       

Host		Pager
Input Power	DC12V/2A	Battery	Li-ion 3.7V 300mAh
Frequency	433.92MHz	Frequency	433.92MHz
Transmit Power	26dBm	Standby Current	<12mA
Standby Power	<120mW	Standby Duration	10h
Modulation Type	FSK	Sensitivity	-115dBm
Max Capacity	998 pagers	Max Distance	800-1000m
Charging for pagers	10pcs*2	Prompt Mode	Vibration/Buzzer/Flashing
Dimensions	220*215*26mm	Prompt Time	30seconds

 

1. Instructions for use

1. Before using

Wiring: Host connects to power source via adapter.
Connect the host to power source, and charge the pagers for 10 minutes at least before using.
Charging Indicator Information:

Charging Indicator Flashes:	Charging
Charging Indicator Always On:	Full Charged

 

1. Operating Instruction

CALL mode is the default mode. Continuously press Delete button (←) to return Call Mode if in other mode. C--- is displayed in CALL mode.
Input the number and press CALL button to call the corresponding pager.
 

1. Mute Mode

Press MUTE and 999 (S999 displayed) then press CALL, all charging pagers change to MUTE mode.
Press MUTE and 000 (S000 displayed) then press CALL, all charging pagers change to normal mode.
In MUTE mode, all pagers only vibrate and flash while being called.
Continuously press DELETE button (←) to return CALL mode. (C--- displayed)
 

1. Call History

Press button H to check the recent 10 called numbers (HXXX displayed). Press △/▽ button to page up/down.
Continuously press DELETE button (←) to return CALL mode. (C--- displayed)
Note: No looping of △/▽.
 

1. One-Call-Off

In CALL mode, press 999 and press CALL, all charging pagers will be off. Re-charge pagers will turn on again.
Note: This instruction is invalid to the pagers not being charged.
 

1. Program Operation

All pagers are programmed before delivery. So this operation is only necessary when adding new pagers or changing numbers.
Put the pagers on the charging base, press P and 999 (P999 displayed), then press CALL to enter programming mode. The operation must be finished in 20 seconds after pagers are charged.
In programming mode, all LED display of the pagers will keep flashing.
Then input number and press CALL, all pagers display this number. Move the top pager away, the pager will beep once and stop flashing. It means the pager is programmed.
Repeat the steps to program other pagers.
Note: The pagers will quit programming mode if no operation within 1 minute. All pagers' numbers will not change if not being programmed.
1 pager only can be programmed 1 number. Old number will be replaced by the new one.
 

1. Instruction Description

Instruction	Buttons	Display	Function
Programming Mode	P+999+CALL	P999	To enter programming mode
History	H	H + Number	Check recent 10 call records.
Mute Mode	+999+Call	S999	All charging pagers switch to MUTE mode.
Quit Mute Mode	+000+Call	S000	All charging pagers quit MUTE mode.
Call pagers	[Number]+Call	C+[Number]	The corresponding pager begin to remind.

 

1. Common Troubles and Solutions

Trouble	Analysis	Solution
The pager can't be programmed.	1.The pager is not being charged. 2.Charging is more than 20s.	1. Make sure the pagers are well charged. 2. Try again within 20s after recharging.
The pager can't be One-Call-Off	The pager is not being charged.	Make sure the pagers are well charged and try again.
The pager doesn't response.	1. The pager is out of power. 2. Out of call range.	1.Use after full charged. 2.Use within range of call.