868MHz RF Transmitter and Receiver Module Kl-RF06

• Type: Wireless
• Usage: Auto, Door, Wireless Controller
• Channel: 6CH
• Receive Frequency: 868MHz
• Transmission Rate: 600k/S
• Model Name: Receiver Module
• Model NO.: KL-RF06
• Operating Voltage: DC3-12V
• Standby Current: 16mA
• Frequency: 868MHz / Customized
• Modulation Type: Fsk(FM)
• Receiver Sensitivity: -120dBm
• Encoding Type: Private Learning Code
• Encoding Chip: Private MCU
• Output Way: Momentary, Toggle , Latched (with Jumper Hat)
• Dimension: 41*19*7mm
• Transport Package: Blister & Carton
• Specification: 41*19*7mm
• Trademark: KELVIN
• Origin: Shenzhen, China
• HS Code: 8526920000
• Production Capacity: 50000pieces / Mouth

Product Description

868MHz High Sensitivity RF transmitter and receiver module KL-RF06

KL-RF06 and KL-TF06 adopts American imported high sensitivity RF IC,so that it has good quality, strong anti-static protection, high sensitivity, stable and reliable performance. It decodes by MCU.It's widely used in remote garage door opener, auto gates as retract type, brakes, factory automatic, communication and security system etc.

KL-TF06 is transmitter module match KL-RF06 


http://szklvn.en.made-in-china.com/product/AsREzauOItkG/China-868MHz-RF-Transmitter-FM-Module-Kl-TF06.html

1. Characteristic:

Ø  High sensitivity, -120dBm.

Ø  Decoding by MCU, supports PT2262/SC2262/2260/2264/EV1527, etc.

Ø 3 Working modes adjustable (Momentary/Toggle/Latching)

Ø  Small size (41*19*7mm).

Ø  Low power consumption.

Ø  Low self emission, can easy pass all kinds of certification.
 

2. Specification:

Ø  Frequency: 868MHz

Ø  Working Voltage: DC3V / 5V, optional

Ø  Working Current: 4mA

Ø  Modulation: ASK/OOK

Ø  Sensitivity: -110dBm.

Ø  Dimension:  39*19*7mm

Ø  Working Temperature: -10~70°C

 

3. Applications:

1). Garage door and gate openers

2). Electric windows, barrier, etc.

3). Remote controls and smart home alarm

4). Low baud rate for data transmission

4. Pin Assignment:


 

PIN	Description
D0	Data
D1	Data (Latching Mode when Jumper on it)
D2	Data
D3	Data
D4	Data (Toggle Mode when Jumper on it)
D5	Data (Momentary Mode when Jumper on it)
ANT	Antenna
VCC	Power +
GND	Ground

5. Matching Transmitter:
KL-TF06 is a FSK transmitter module, must work with KL-RF06 together. Pair them before using.

Operation steps:
1) Press learning button and hold on for 3 seconds, the LED indicator lights.
2) Short-circuit either one among D1, D4 and D5 with a jumper on transmitter module.
3) The LED indicator will be off after once blink. That means matching is done. One receiver can memorize maximum 20pcs different transmitters.
4) Jumper on D1 while matching, output Latching working mode.
Jumper on D4 while matching, output Toggle working mode.
Jumper on D5 while matching, output Momentary working mode.
5) The receiver can work at only one working mode with one transmitter, but three working mode with different transmitters.
6) Delete transmitter: Press the learning button and hold on for over 3s till the LED indicator off after lighting.
 
The antenna should be Φ1mm, 86mm length single-core copper wire.
 
6.Antenna Application Guide
For whip antenna, it is best to use the antenna of 1/4 wavelength, for antenna has a great impact on receiving effect of the module, normally using 50Ω single core cable. For frequency 315MHz, the length of antenna is about 23cm, for 433MHz, it is about 17cm, and for 868MHz, it is about 8cm.
The position of antenna also affects the receiving effect of the module. During installation, the antenna should be extended as much as possible, away from the shield enclosure and placed high above ground.

7. Shipping

1) Express: DHL, FedEx, UPS, TNT, EMS, etc.

2) By air

3) By sea

4) By special line

Depends on buyer's requirement. 

 

8.FAQ

1) What is your warranty period?

Generally, we provide 1 year warranty for all our products unless otherwise mentioned. (Some are 2 years.)

For DOA (Defective On Arrival) items, which will be replaced or refund, please inform us within 3 days of arrival, please also keep all components and original packaging as further checking maybe required, faulty items must be returned for repair or exchange.

 

2) If i don't know how to use the products, what can i do?

Pls contact us whenever you need our help, even we are not online. 

You can write email to us, or contact us byTrademanager, Skype, and other IM tools. 

We are all very glad to answer your questions. 

 

3) What certifications do you have?

Most of our products are approved with CE certification, some are with FCC. 

If you have any other requriements with certifications, we also would like to help you. 

 

9. Our Service

1. Accept OEM, ODM &silk-screen printing you logo on the shell.

2. Response in 10 hours.

3. Experienced R&D staff.

4. Professional SMT equipments.

5. Accept payment via T/T, Paypal, Western Union, Escrow, and so on.

6. Delivery by DHL,UPS,EMS or by sea as your requirments.

 

10. For order

1).Accept OEM.

2).Print logo on the case and pakage

3).Payment Details :30% deposite,70% balance before shipment. Payment accept T/T, Western union, PayPal, optional)

4).Minimum Order:100 pcs (accept trial order)

5).Delivery Details: within 3-5 days depends on order quantity.

 

http://szklvn.en.made-in-china.com/