| Customization: | Available |
|---|---|
| Product Name: | Remote Controller |
| Channel: | 4 |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4 Channels Wireless Remote Light Controller Kl-K400c
KL-K400C is a 4-Channle learning code remote controller, it works at DC12V, and output switching ON/OFF via 4 channels, each channel has 3 terminals which are NO, NC and COM.
Operation Method:
1. Match code:
Hold learning button and learning indicator light blinks, then press a buttons of remote control, if indicator lights flashes 3 times, match code successfully. Maximum 20 remote controls can be matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Jumper on S2→ Latching
No Jumper on S1 &S2→ Momentary
Working Mode:
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.
Wiring Way & Diagram:
B=Normally Closed, K=Normally Open, G=Common.
Please refer to below picture as wiring diagram:
Tech Data:
4 Channels Wireless Remote Light Controller Kl-K400c
| Input | DC 12V (DC9V, 24V can be customized) |
| Channels | 4 |
| Working Frequency | 433MHz / 315MHz, Optional |
| Receiving Sensitivity | -103dBm |
| Decoding Type | Leaning Code(EV1527) / Fixed Code(PT2262) |
| Working Mode | Momentary / Toggle / Latching |
| Dimension | 49*69*20mm |
Shipping
Certifications
){kind=link}