Wireless universal rf 433mhz remote controller KL-K211X
Operation Method:
1. Match code:
Hold learning button and learning indicator light blinks, then press any buttons of remote control, if indicator lights flashes 3 times, match code successfully.
Maximum 20 remote controls can be matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Jumper on S2→ Latching
No Jumper on S1 &S2→ Momentary
Tech Data:
AC 220V 1-Ch Remote Control Switch KL-K111X
| Input |
AC 220V (AC110V is customized) |
| Channels |
1 |
| Quiescent Current |
12mA |
| Working Frequency |
433MHz / 315MHz, Optional |
| Receiving Sensitivity |
-103dBm |
| Decoding Type |
Learning Code(EV1527) / Fixed Code(PT2262) |
| Working Mode |
Momentary / Toggle / Latching |
| Output |
Switching Signal (Dry Contact) / Active Switching Signal (Wet Contact) |
| Max Load |
50A (Relay Contact) |
| Dimension |
100*65*50mm |
Working Mode:
1. Non-lock/Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Self-lock/Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Inter lock/Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.
Wiring Way & Diagram:
B=Normally Closed, K=Normally Open, G=Common.
Please refer to below diagram as wiring for 2 different output modes:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}